Formation of Palygorskite Clay from Treated Diatomite and its Application for the Removal of Heavy Metals from Aqueous Solution
Ikusi/ Ireki
Data
2018-09-15Egilea
Nefzi, Houwaida
Abderrabba, Manef
Ayadi, Sameh
Labidi Bouchrika, Jalel
Water 10(9) : (2018) // Article ID 1257
Laburpena
Environmental contamination by toxic heavy metals is a serious worldwide phenomenon. Thus, their removal is a crucial issue. In this study, we found an efficient adsorbent to remove Cu2+ and Ni2+ from aqueous solution using two materials. Chemical modification was used to obtain palygorskite clay from diatomite. The adsorbents were characterized using X-ray florescence, Fourier transform infrared spectroscopy and X-ray diffraction. The effects of contact time, initial concentration, temperature and pH on the adsorption process were investigated. Our results showed that the (%) of maximum adsorption capacity of diatomite was 78.44% for Cu2+ at pH 4 and 77.3% for Ni2+ at pH 7, while the (%) of the maximum adsorption on palygorskite reached 91% for Cu2+ and 87.05% for Ni2+, in the same condition. The results indicate that the pseudo-second-order model can describe the adsorption process. Furthermore, the adsorption isotherms could be adopted by the Langmuir and the Freundlich models with good correlation coefficient (R-2). Thus, our results showed that palygorskite prepared from Tunisian diatomite is a good adsorbent for the removal of heavy metals from water.