Automobilentzako gurpilen biltegi baten diseinua eta kalkulua
Abstract
Laburpena: proiektu honen helburua gurpilen biltegi bezala erabiliko den egitura industrial baten kalkulua eta diseinua da. Egitura Basaurin (Bizkaia) kokatuta egongo da, zehaztasunez, A.H.V. industrialdean.
Egitura simetrikoa eta bi uretara diseinatuko da, 5°-tako inklinazioarekin eta 25 m-tako zabalerarekin. 15 portiko izango ditu (14 hutsune), 6 m-tako distantziarekin beraien artean, hau da, 84 m-tako luzera totala eta 2100 m2-tako gainazala izango ditu. Gailurraren altuera 11,09 m-takoa izango da. Portiko hastialak sekzio konstantekoak izango dira, eta gainerakoak sareta bidezko portikoak. Egituraren barnean bigarren eta hamabigarren portikoen artean dabilen zubi garabi bat egongo da, 5 tn-tako kapazitatea, 60 m-tako ibilbidea eta 25 m-tako zabalera izango ditu. Hamahirugarren eta hamabosgarren portikoen artean bigarren solairu bat kokatuta egongo da 4 m-tako altueran, egituraren zabalera osoa (25 m) beteko du, hortaz, 300 m2-tako gainazala izango du. Resumen: el presente proyecto tiene por objeto el calculo y el diseño de una nave industrial cuya aplicación estará destinada al almacenamiento de neumáticos. Se ubicará en la zona industrial A.H.V. de Basauri (Bizkaia).
La nave se diseñará simétrica a dos aguas con una inclinación de 5° y 25 m de ancho. Estará compuesta por 15 pórticos (14 huecos) cada 6 m, haciendo un total 84 m de largo, como resultado la superficie construida será de 2100 m2. La altura máxima hasta la cumbrera será de 11,09 m. Los pórticos hastiales serán de sección constante, mientras que el resto serán pórticos en celosía. La nave constará de un puente grúa con una capacidad 5 tn y 25 m de ancho, cuyo recorrido será de 60 m, del segundo y al decimosegundo pórtico. Entre el decimotercer y el decimoquinto pórtico estará colocada una segunda planta a una altura de 4 m, dicha planta ocupará todo el ancho de la nave (25 m) por lo tanto su superficie será de 300 m2. Abstract: the aim of this project is to calculate and design an industrial building, which purpose will be to warehouse tyres. It will be located at A.H.V. industrial zone in Basauri (Bizkaia).
The building will be symmetric and gabled roof with 5° of inclination, 25 m wide and 11,09 m height. The building will be formed by 15 porticoes (14 gaps) with a distance of 6 m between them; therefore, it will have 84 m length. The area occupied by the building will be of 2100 m2. The first and the last porticos will have constant sections, while the rest of them will be lattice porticoes. A 25 m wide bridge crane, with a capacity of 5 tn, will be located inside the structure; its travelling will be 60 m long, between the second and the twelfth porticoes. A 25 m wide second floor will be located at 4 m height between the thirteenth and fifteenth porticoes; therefore, its surface will be 300 m2.