On the Use of a Simplified Slip Limit Equation to Predict Screw Self-Loosening of Dental Implants Subjected to External Cycling Loading
Fecha
2020-09-26Metadatos
Mostrar el registro completo del ítem
Applied Sciences 10(19) : (2020) // Article ID 6748
Resumen
Self-loosening of the prosthetic screws is a major mechanical problem affecting roughly 10% of dental implants, according to the literature. This phenomenon may lead to micro-movements that produce crestal bone loss, peri-implantitis, or structural failure of the implant assembly. In this paper, a simple and effective tool to predict self-loosening under masticatory loads is presented. The loads acting on the screw are obtained from a simple finite element (FE) model, and introduced in a mathematical formula that calculates the torque needed to loosen the screw; self-loosening will occur when this torque becomes zero. In this sense, all the parameters involved in self-loosening phenomenon can be easily identified, and their effect quantified. For validating purposes, 90 experimental tests were performed in a direct stress test bench. As a result, a powerful tool with a maximum experimental error of 7.6% is presented, allowing dental implant manufacturers to predict eventual occurrence of self-loosening in their developed dental implant products and take corrective actions at preliminary design stage. Furthermore, the following clinical implications can be directly derived from the methodology: a higher screw preload, that is a higher tightening torque, improves self-loosening response of the dental implant and, similarly, for a given preload force, higher friction coefficient and screw metric, as well as lower pitch and thread angle values, are also found to be beneficial.
Colecciones
Excepto si se señala otra cosa, la licencia del ítem se describe como 2020 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).