Solid Fraction Determination at the Rigidity Point by Advanced Thermal Analysis

Thumbnail
Ikusi/Ireki
Data
2021-11-27
Egilea
Villanueva, Ester
Vicario Gómez, Iban ORCID
Sánchez Severino, Jon Mikel
Albizuri Irigoyen, Joseba ORCID
Montero, Jessica
Metadata
Itemaren erregistro osoa erakusten du
  Estadisticas en RECOLECTA
(LA Referencia)

Applied Sciences 12(1) : (2021) // Article ID 237
URI
http://hdl.handle.net/10810/54913
Laburpena
The aim of this work is to determine the Solid Fraction (SF) at the rigidity point (FRP) by applying advanced thermal analysis techniques. The variation of the FRP value is important to explain the solidification behavior and the presence or absence of defects in aluminum alloys. As the final alloy composition plays a key role on obtained properties, the influence of major and minor alloying elements on FRP has been studied. A Taguchi design of experiments and a previously developed calculating method, based on the application of high rank derivatives has been employed to determinate first the rigidity point temperature (RPT) and after the corresponding FRP for AlSi10Mg alloys. A correlation factor of r2 of 0.81 was obtained for FRP calculation formula in function of the alloy composition.
Collections
2021 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).
Bestelakorik adierazi ezean, itemaren baimena horrela deskribatzen da:2021 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).