Show simple item record

dc.contributor.authorBilbao Zarraga, Yoana ORCID
dc.contributor.authorTrujillo, Juan José ORCID
dc.contributor.authorVicario Gómez, Iban ORCID
dc.contributor.authorArruebarrena, Gurutze ORCID
dc.contributor.authorHurtado, Iñaki ORCID
dc.contributor.authorGuraya Díez, María Teresa
dc.date.accessioned2022-08-05T07:04:37Z
dc.date.available2022-08-05T07:04:37Z
dc.date.issued2022
dc.identifier.citationMaterials 15(14) : (2022) // Article ID 5056es_ES
dc.identifier.issn1996-1944
dc.identifier.urihttp://hdl.handle.net/10810/57209
dc.description.abstractNewly designed multicomponent light alloys are giving rise to non-conventional microstructures that need to be thoroughly studied before determining their potential applications. In this study, the novel Al58Zn28Si8Mg6 alloy, previously studied with CALPHAD methods, was cast and heat-treated under several conditions. An analysis of the phase evolution was carried out with in situ X-ray diffraction supported by differential scanning calorimetry and electron microscopy. A total of eight phases were identified in the alloy in the temperature range from 30 to 380 °C: α-Al, α’-Al, Zn, Si, Mg2Si, MgZn2, Mg2Zn11, and SrZn13. Several thermal transitions below 360 °C were determined, and the natural precipitation of the Zn phase was confirmed after nine months. The study showed that the thermal history can strongly affect the presence of the MgZn2 and Mg2Zn11 phases. The combination of X-ray thermo-diffraction with CALPHAD methods, differential scanning calorimetry, and electron microscopy offered us a satisfactory understanding of the alloy behavior at different temperatures.es_ES
dc.description.sponsorshipThis research was funded by the BASQUE GOVERNMENT through the Elkartek project KK-2020/00047.es_ES
dc.language.isoenges_ES
dc.publisherMDPIes_ES
dc.rightsinfo:eu-repo/semantics/openAccesses_ES
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/
dc.subjectlightweight multicomponent alloyses_ES
dc.subjectX-ray thermo-diffractiones_ES
dc.subjectdifferential scanning calorimetryes_ES
dc.subjectAl–Znes_ES
dc.subjectZn precipitationes_ES
dc.subjectMg–Zn phaseses_ES
dc.subjectstrontium modificationes_ES
dc.titleX-ray Thermo-Diffraction Study of the Aluminum-Based Multicomponent Alloy Al58Zn28Si8Mg6es_ES
dc.typeinfo:eu-repo/semantics/articlees_ES
dc.date.updated2022-07-25T16:33:38Z
dc.rights.holder© 2022 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https:// creativecommons.org/licenses/by/ 4.0/).es_ES
dc.relation.publisherversionhttps://www.mdpi.com/1996-1944/15/14/5056es_ES
dc.identifier.doi10.3390/ma15145056
dc.departamentoesIngeniería Minera y Metalúrgica y Ciencia de los Materiales
dc.departamentoeuMeatze eta metalurgia ingeniaritza materialen zientzia


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

© 2022 by the authors.
Licensee MDPI, Basel, Switzerland.
This article is an open access article
distributed under the terms and
conditions of the Creative Commons
Attribution (CC BY) license (https://
creativecommons.org/licenses/by/
4.0/).
Except where otherwise noted, this item's license is described as © 2022 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https:// creativecommons.org/licenses/by/ 4.0/).