Digital Light 3D Printing of PEDOT-Based Photopolymerizable Inks for Biosensing
Ikusi/ Ireki
Data
2022Egilea
López Larrea, Naroa
Criado González, Miryam
Domínguez Alfaro, Antonio
Alegret Ramón, Nuria
Del Agua López, Isabel
Marchiori, Bastien
Mecerreyes Molero, David
ACS Applied Polymer Materials 4(9) : 6749-6759 (2022)
Laburpena
3D conductive materials such as polymers and hydrogels that interface between biology and electronics are actively being researched for the fabrication of bioelectronic devices. In this work, short-time (5 s) photopolymerizable conductive inks based on poly(3,4-ethylenedioxythiophene) (PEDOT):polystyrene sulfonate (PSS) dispersed in an aqueous matrix formed by a vinyl resin, poly(ethylene glycol) diacrylate (PEGDA) with different molecular weights (M-n = 250, 575, and 700 Da), ethylene glycol (EG), and a photoinitiator have been optimized. These inks can be processed by Digital Light 3D Printing (DLP) leading to flexible and shape-defined conductive hydrogels and dry conductive PEDOTs, whose printability resolution increases with PEGDA molecular weight. Besides, the printed conductive PEDOT-based hydrogels are able to swell in water, exhibiting soft mechanical properties (Young's modulus of similar to 3 MPa) similar to those of skin tissues and good conductivity values (10(-2) S cm(-1)) for biosensing. Finally, the printed conductive hydrogels were tested as bioelectrodes for human electrocardiography (ECG) and electromyography (EMG) recordings, showing a long-term activity, up to 2 weeks, and enhanced detection signals compared to commercial Ag/AgCl medical electrodes for health monitoring.