Combined effect of bio-oil composition and temperature on the stability of Ni spinel derived catalyst for hydrogen production by steam reforming
Ikusi/ Ireki
Data
2022-10Egilea
García Gómez, Naiara
Valecillos Díaz, José del Rosario
Valle Pascual, Beatriz
Remiro Eguskiza, Aingeru
Bilbao Elorriaga, Javier
Gayubo Cazorla, Ana Guadalupe
Fuel 326 : (2022) // Article ID 124966
Laburpena
A challenge for scaling up hydrogen production by raw bio-oil steam reforming (SR) is the rapid catalyst deactivation that is strongly sensitive to the temperature and bio-oil composition. This work studies the combined effect of both variables on the stability of a Ni/Al2O3 catalyst with high Ni dispersion in the internal and external surfaces of the particles, obtained by reduction of a NiAl2O4. The raw bio-oil composition is modified by (i) removal of phenolic compounds by liquid-liquid extraction or (ii) use of an online pre-reforming step with dolomite. Then, SR tests of the bio-oils at 600 and 700 ?C are carried out in a system with two online units, the first one for controlled deposition of pyrolytic lignin (and also pre-reforming with dolomite) and the second one (fluidized bed reactor) for the SR of the volatile oxygenates. The time on stream evolution of the conversion and products yields is related to the amount, nature and location of coke in the catalyst particles, determined with several techniques. For bio-oils with high or moderate phenolic content (raw or pre-reformed bio-oil, respectively), the SR at 600 ?C leads to a moderate deactivation. However, at 700 ?C, a refractory coke is formed, mainly composed of carbon filaments and turbostratic carbon among them that causes a rapid catalyst deactivation by blocking the external surface of the catalyst particle. Conversely, the removal of phenolic compounds from raw bio-oil leads to a more stable SR operation at 700 ?C, because the formation of turbostratic carbon is slowed down.