Tuning pyrolysis temperature to improve the in-line steam reforming catalyst activity and stability
Ikusi/ Ireki
Data
2022-10Egilea
Artetxe Uria, Maite
Amutio Izaguirre, Maider
Bilbao Elorriaga, Javier
Process Safety and Environmental Protection 166 : 440-450 (2022)
Laburpena
This study analyzes the two-step process of biomass pyrolysis and in-line steam reforming for the production of H2. In order to evaluate the effect of the volatile composition on the commercial Ni/Al2O3 catalyst performance and stability, biomass pyrolysis step was conducted at different temperatures (500–800 °C). The analysis of the deactivated catalysts has also allowed identifying the main bio-oil compounds responsible for catalyst decay (coke precursors). Pyrolysis temperature allows modifying the composition of the volatile stream that is subsequently reformed at 600 °C. An increase in pyrolysis temperature to 800 °C improves considerably the production of both H2 and gaseous stream at the initial reaction stages, reaching values of 12.95 wt% and 2.23 Nm3 kg−1, respectively. Catalyst stability is also considerably improved when pyrolysis temperature is increased due to the lower bio-oil yield and its different composition at high temperatures. Coke was the main cause of catalyst deactivation. Besides, the nature of the coke deposited is influenced by the composition of the pyrolysis volatiles, with encapsulating coke being formed by the adsorption and subsequent condensation of all hydrocarbons (oxygenated and non-oxygenated ones) preferably at low temperatures, whereas filamentous coke is formed when the concentrations of CO and light hydrocarbons in the volatile stream are increased at 800 °C.