Bio‑hydrogen and valuable chemicals from industrial waste glycerol via catalytic aqueous-phase transformation
Ver/
Fecha
2023-04Autor
Ayastuy Arizti, José Luis
Iriarte Velasco, Unai
Gutiérrez Ortiz, Miguel Angel
Metadatos
Mostrar el registro completo del ítem
Fuel Processing Technology 242 (2023) // Article ID 107634
Resumen
Waste glycerol obtained as by-product of biodiesel production has been submitted to a sequential physico-chemical treatment in order to make it suitable for continuous Aqueous-Phase Reforming (APR) in a tubular reactor. Special focus was given to the impact of impurities. APR was performed using 0.3%Pt/CoAl2O4 catalyst, at 260 °C and 50 bar within WHSV range 6–55 h−1 to cover whole conversion ranges. Glycerol conversion and yield to hydrogen reached 99.7% and 45.4%, respectively at WHSV = 6 h−1. The liquid product distribution strongly varied with glycerol conversion, maximum C-yield to 1,2-propylene glycol was attained in the 60–90% glycerol conversion range. APR of methanol and acetic acid aqueous feedstreams were investigated independently. It was concluded that acetic acid exerts a negative influence on catalyst stability since glycerol conversion decreased by 41% after 5 h TOS. Extensive characterization of fresh and exhausted catalysts revealed strong Co leaching, especially for acetic acid APR, oxidation of metals, and carbonaceous deposits. The basis for the regeneration of the spent catalyst, consisting of a reductive treatment at 500 °C, has been established. This work is expected to have significant implications for the development of APR technology for crude glycerol from biodiesel industry.