Buscar
Mostrando ítems 141-150 de 170
Analysis of the modal choice of transport at the case of university: Case of University of the Basque Country of San Sebastian
(Elsevier, 2017-04-11)
Transportation has significant and long lasting economical, social and environmental impacts, and so is an important dimension of urban sustainability.
Any effort that is made to achieve sustainability must take into ...
Control loop tuning by thermal simulation applied to the laser transformation hardening with scanning optics process
(Elsevier, 2016-04)
Laser transformation hardening with scanning optics (LTHS) is a novel manufacturing process on a very preliminary stage of introducing it in the surface treatment industry. The key to ensure the success in this process is ...
Evaluation of efficiency and mechanical properties of Inconel 718 components built by wire and powder laser material deposition
(Emerald Publishing Limited, 2017-10-17)
PurposeThe purpose of this paper is to evaluate and compare powder and wire laser material deposition (LMD) processes.Design/methodology/approachIn the present paper, Inconel 718 tensile test probes were built layer by ...
Internal characterization and hole formation mechanism in the laser percussion drilling process
(Elsevier, 2013-09-09)
Laser percussion drilling is increasing its relevance in many industrial applications, being used particularly in the aircraft industry in performing the micro-holes in nickel based alloys turbine blades for cooling, or ...
Rigid pavement performance models by means of Markov Chains with half-year step time
(Taylor & Francis, 2019-07-03)
[EN] Pavement management systems employ pavement performance models to plan the most effective allocation of public funds. The most used models are the deterministic and the probabilistic or stochastic ones. Among stochastic ...
Evaluation of the relevance of melt pool dynamics in Laser Material Deposition process modeling
(Elsevier, 2017-07-14)
The melt pool dynamics consideration in the numeric modeling of the Laser Material Deposition (LMD) process can be enormously difficult and expensive, especially if this calculation is not strictly necessary. The increased ...
Experimental assessment of an End Notched Flexure test configuration with an inserted roller for analyzing mixed-mode I/II fracture toughness
(Elsevier, 2016-09)
This study describes the experimental work related to a test configuration proposed recently, based on an End Notched Flexure test configuration modified with an inserted roller. Various mixed-mode ratio tests have been ...
Instantaneous powder flux regulation system for Laser Metal Deposition
(Elsevier, 2017-09-04)
A new control system for regulating the powder flux during the laser metal deposition process (LMD) has been designed, developed and validated. The powder regulation system is based on a solenoid, which is coupled to the ...
Hardness, grainsize and porosity formation prediction on the Laser Metal Deposition of AISI 304 stainless steel
(Elsevier, 2018-08-14)
[EN] The presented numerical model solves the heat and mass transfer equations in the Laser Metal Deposition process and based on the evolution of the thermal field predicts the grainsize, the resulting hardness and evaluates ...
Equivalent Energy Release Rate And Crack Stability In The End Notched Flexure With Inserted Roller Mixed Mode I/II Test
(Elsevier, 2017-02)
The crack propagation performance of the End Notched Flexure with inserted roller test is analyzed. An equivalent energy release rate is proposed taking into account the interaction of the modes I and II, based on the ...