Now showing items 87-106 of 40242

    • Thumbnail

      3D Cytocompatible Composites of PCL/Magnetite 

      Díaz Tajada, Esperanza; Valle García, María Blanca; Ribeiro, Sylvie; Lanceros Méndez, Senentxu; Barandiarán García, José Manuel (MDPI, 2019-11-21)
      A study of Magnetite (Fe3O4)as a suitable matrix for the improved adhesion and proliferation of MC3T3-E1 pre-osteoblast cells in bone regeneration is presented. Biodegradable and magnetic polycaprolactone (PCL)/magnetite ...
    • Thumbnail

      3D digitization of complex exhibition items (mounted skeletons of dinosaurs) and generation of virtual replicas for biomechanical studies 

      Rodriguez-Miranda, Alvaro; Valle Melón, José Manuel ORCID; Torices, Angélica; Lostado, Rubén; Navarro, Pablo; Elorriaga Aguirre, Garbiñe ORCID; Korro Bañuelos, Jaione; Zornoza-Indart, Ainara (Copernicus GmbH (on behalf of the ISPRS), 2019-09)
      [ES] El presente trabajo forma parte de un estudio más amplio relativo al análisis biomecánico del movimiento de los dinosauros, que será realizado utilizando la técnica de los elementos finitos (FEM). Para este fin, será ...
    • Thumbnail

      3D geolokalizazioa androidetan 

      Ruiz Monzón, María Teresa (2012-11-09)
      Karrera amaierako proiektu honetan telefono mugikor aurreratuentzako aplikazio grafiko bat garatu da. Aplikazioak mendizaleei lainoa dagoenean orientatzen lagundu nahi die, ikuspen ezagatik galdu ez daitezen. Hori lortzeko, ...
    • Thumbnail

      3D histologia, RGB-tik 3D-ra: 3D inpresio bidezko histologia objektu baten sorkuntza 

      Mantxola Akizu, Asier (2019-11-27)
      Informazio kantitate handiak transmititzeko duten gaitasuna dela eta, irudiek izugarrizko garrantzia dute zientzia zein hezkuntza munduan. Teknologia berrien garapenarekin urtetik urtera handituz doa grafikoek, diagramek, ...
    • Thumbnail

      3D Ikusmen sistemen softwareen konfigurazioa eta konparaketa 

      Arruarte Zapiain, Josu (2017-11-27)
      Proiektua robotika alorrean kokatzen da, zehazki ikusmen artifiziala izeneko esparruan. Proiektua kamera eta proiektore independente batzuekin osaturiko 3D eskaner baten softwarearen bilaketan eta azterketan zentraturik ...
    • Thumbnail

      3D Inprimagailuan erabiltzeko harien prozesaketa 

      Bikarregi Iglesias, Aitor (2017-07)
      [EU]Proiektu honen helburua 3D inprimagailuan erabil daitekeen hariaren prozesaketa burutzea da. Industria munduan ezaguna den prozesua izan arren, unibertsitate honetako laborategira ekarri nahi da, bertako ikerketetarako ...
    • Thumbnail

      3D inprimatze bidez lortutako almidoi pastillen askatze pertsonalizatua 

      Lejardi Mugica, Aroa (2022-10-18)
      Lan honetan, 3D inprimaketa bidez almidoian oinarritutako pastillak garatu dira eta haien ezaugarriak aztertu dira. Horretarako, jatorri botaniko ezberdineko hiru almidoi erabili dira eszipiente modura eta bi osagai aktibo ...
    • Thumbnail
    • Thumbnail

      3D line drawing from point clouds using chromatic stereo and shading 

      Rodriguez-Miranda, Alvaro; Valle Melón, José Manuel ORCID; Martínez Montiel, José María (Virtual Systems and Multimedia – VSMM2008, 2008-10)
      [EN] Terrestrial laser scanners (TLS) have become a common tool in geometric documentation of heritage. As output, they can produce point clouds along with thematic information such as reflectance or photographic texture. ...
    • Thumbnail

      3D Magnetization Textures: Toroidal Magnetic Hopfion Stability in Cylindrical Samples 

      Gusliyenko, Kostyantyn (MDPI, 2024-01-04)
      Topologically non-trivial magnetization configurations in ferromagnetic materials on the nanoscale, such as hopfions, skyrmions, and vortices, have attracted considerable attention of researchers during the last few years. ...
    • Thumbnail

      3D Modelling in the registration and restoration of a megalithic tomb 

      Rodriguez-Miranda, Alvaro; Pérez Vidiella, Pablo; Fernández Eraso, Javier María ORCID; Múgica Alustiza, José Antonio; Valle Melón, José Manuel ORCID (ISPRS (International Society for Photogrammetry and Remote Sensing), 2017-05)
      [EN] This article aims at showing some potential applications of geomatics to works in which both excavation and restoration are carried out simultaneously, so that the three-dimensional layout of the monument undergoes ...
    • Thumbnail

      3D Porous Graphene-Polymer Materials for CO2 capture 

      Barbarin Abarzazu, Iranzu (2022-10-14)
      The era of energy demand will continue increasing in the next decades, and as a consequence, the emissions of pollutant greenhouse gases, especially CO2. Thus, there is a great interest in the development of efficient and ...
    • Thumbnail

      3D Printable and Biocompatible Iongels for Body Sensor Applications 

      Luque, Gisela C.; Picchio, Matías L.; Martins, Ana P. S.; Domínguez Alfaro, Antonio; Ramos Gómez, Nicolás; Del Agua López, Isabel; Marchiori, Bastien; Mecerreyes Molero, David; Minari, Roque Javier; Tomé, Liliana C. (Wiley, 2021-08)
      Soft-ionic materials with biocompatibility and 3D printability are needed to develop next-generation devices to interface between electronic and biological signals. Herein, thermoreversible and biocompatible ionic liquid ...
    • Thumbnail

      3D Printable Conducting and Biocompatible PEDOT-graft-PLA Copolymers by Direct Ink Writing 

      Domínguez Alfaro, Antonio; Gabirondo Amenabar, Elena; Alegret Ramón, Nuria; De León Almazán, Claudia María; Hernández Aguirresarobe, Roberto; Vallejo Illarramendi, Ainara ORCID; Prato, Maurizio; Mecerreyes Molero, David (Wiley-VCH GmbH, 2021-05-03)
      Tailor-made polymers are needed to fully exploit the possibilities of additive manufacturing, constructing complex and functional devices in areas such as bioelectronics. In this article, we show the synthesis of a conducting ...
    • Thumbnail

      3D printable polylactide-based functional systems with enhanced radiopacity and biological activity 

      Sádaba Larraona, Naroa (2021-05-17)
      La tesis titulada "3D printable polylactide-based functional systems with enhanced radiopacity and biological activity". se centra en la impresión 3D de composites basados en polylactide.Para ello, primeramente se hace un ...
    • Thumbnail

      3D printed alginate-cellulose nanofibers based patches for local curcumin administration 

      Olmos Juste, Raquel; Alonso Lerma, Borja; Pérez Jiménez, Raúl; Gabilondo López, Nagore; Eceiza Mendiguren, María Aranzazu (Elsevier, 2021-07)
      Alginate and nanocellulose are potential biomaterials to be employed as bioinks for three-dimensional (3D) printing. Alginate-cellulose nanofibers (A-CNF) formulations with CNF amounts up to 5 wt% were developed and ...
    • Thumbnail

      3D Printed Bioplastics with Shape-Memory Behavior Based on Native Bovine Serum Albumin 

      Sánchez Rexach, Eva Gloria; Smith, Patrick T. ORCID; Gómez López, Álvaro ORCID; Fernandez, Maxence ORCID; López Cortajarena, Aitziber ORCID; Sardon Muguruza, Haritz; Nelson, Alshakim ORCID (ACS, 2022-04-19)
      Bio-based plastics that can supplant petroleum-derived materials are necessary to meet the future demands of sustainability in the life cycle of plastic materials. While there are significant efforts to develop protein-based ...
    • Thumbnail

      3D Printed Chitosan-Pectin Hydrogels: From Rheological Characterization to Scaffold Development and Assessment 

      Zarandona Rodríguez, Iratxe ORCID; Bengoechea, Carlos; Álvarez Castillo, Estefanía; De la Caba Ciriza, María Coro ORCID; Guerrero, Antonio; Guerrero Manso, Pedro Manuel ORCID (MDPI, 2021-10-21)
      Chitosan-pectin hydrogels were prepared, and their rheological properties were assessed in order to select the best system to develop scaffolds by 3D printing. Hydrogels showed a weak gel behavior with shear thinning flow ...
    • Thumbnail

      3D Printed Dual-Porosity Scaffolds: The Combined Effect of Stiffness and Porosity in the Modulation of Macrophage Polarization 

      Camarero Espinosa, Sandra; Carlos Oliveira, Maria; Liu, Hong; Mano, Joao F.; Bouvy, Nicole; Moroni, Lorenzo (Wiley, 2022-01)
      Tissue regeneration evolves toward the biofabrication of sophisticated 3D scaffolds. However, the success of these will be contingent to their capability to integrate within the host. The control of the mechanical or ...
    • Thumbnail

      3D printed hydrogels for oral personalized medicine 

      Insua Castellanos, Itziar (2021-11-23)
      [EN] 3D printing has become a promising and revolutionary pill-making technique for the pharmaceutical industry, enabling a relatively low-cost personalized medicine. Fused deposition modelling, also known by its initials ...