Search
Now showing items 1-9 of 9
Semi-Active Magnetorheological Damper Device for Chatter Mitigation during Milling of Thin-Floor Components
(MDPI, 2020-07-31)
The productivity during the machining of thin-floor components is limited due to unstable vibrations, which lead to poor surface quality and part rejection at the last stage of the manufacturing process. In this article, ...
Uncharted Stable Peninsula for Multivariable Milling Tools by High-Order Homotopy Perturbation Method
(MDPI, 2020-11-06)
In this work, a new method for solving a delay differential equation (DDE) with multiple delays is presented by using second- and third-order polynomials to approximate the delayed terms using the enhanced homotopy ...
A reliable turning process by the early use of a deep simulation model at several manufacturing stages
(MDPI, 2017-05-02)
The future of machine tools will be dominated by highly flexible and interconnected systems, in order to achieve the required productivity, accuracy, and reliability. Nowadays, distortion and vibration problems are easily ...
CO2 cryogenic milling of Inconel 718: cutting forces and tool wear Author links open overlay panel
(Elsevier, 2020-07)
Machining Inconel 718 alloy is a challenge due to its low machinability. This thermal resis-tant alloy combines high strength even at high temperatures with strain hardening tendency that causes high forces and extreme ...
Drilling Process in γ-TiAl Intermetallic Alloys
(MDPI, 2018-11-26)
Gamma titanium aluminides (gamma-TiAl) present an excellent behavior under high temperature conditions, being a feasible alternative to nickel-based superalloy components in the aeroengine sector. However, considered as a ...
Prediction Methods and Experimental Techniques for Chatter Avoidance in Turning Systems: A Review
(MDPI, 2019-11)
The general trend towards lightweight components and stronger but difficult to machine materials leads to a higher probability of vibrations in machining systems. Amongst them, chatter vibrations are an old enemy for ...
Hole Making by Electrical Discharge Machining (EDM) of -TiAl Intermetallic Alloys
(MDPI, 2018-07)
Due to their excellent strength-to-weight ratio and corrosion and wear resistance, gamma-TiAl alloys are selected for aerospace and automotive applications. Since these materials are difficult to cut and machine by ...
Improving Stability Prediction in Peripheral Milling of Al7075T6
(MDPI, 2018-08)
Chatter is an old enemy to machinists but, even today, is far from being defeated. Current requirements around aerospace components call for stronger and thinner workpieces which are more prone to vibrations. This study ...
Sensitivity Analysis of Tool Wear in Drilling of Titanium Aluminides
(MDPI, 2019-03-06)
In the aerospace industry, a large number of holes need to be drilled to mechanically connect the components of aircraft engines. The working conditions for such components demand a good response of their mechanical ...