Show simple item record

Numerical assessment of an experimental procedure applied to DCB tests

dc.contributor.authorInsausti Irastorza, Nagore ORCID
dc.contributor.authorAdarraga Usabiaga, María Iciar
dc.contributor.authorDe Gracia Igelmo, Juan
dc.contributor.authorArrese, Ainhoa ORCID
dc.contributor.authorMujika Garitano, Faustino
dc.date.accessioned2024-02-08T08:40:32Z
dc.date.available2024-02-08T08:40:32Z
dc.date.issued2020-02
dc.identifier.citationPolymer Testing 82 : (2020) // Article ID 106288es_ES
dc.identifier.issn0142-9418
dc.identifier.urihttp://hdl.handle.net/10810/64928
dc.description.abstractNumerical analysis of the analytic model of an experimental procedure to determine the crack length, the compliance and the energy release rate has been developed. As a first step, bending tests at different spans have been numerically simulated with the purpose of obtaining the flexural and out-of-plane shear moduli of the material. Then the crack length has been determined from the numerical compliance, considering the material properties previously obtained. The critical energy release rate has also been determined analytically and numerically. There is agreement between the numerical results and those obtained from the analytic model of the experimental procedure.es_ES
dc.description.sponsorshipUPV/EHU GIU 16/51 Grupo Mecánica de Materialeses_ES
dc.language.isoenges_ES
dc.publisherElsevieres_ES
dc.rightsinfo:eu-repo/semantics/openAccesses_ES
dc.rights.urihttps://creativecommons.org/licenses/by-nc-nd/4.0/
dc.subjectdelaminationes_ES
dc.subjectdouble cantilever beames_ES
dc.subjectcrack lengthes_ES
dc.subjectenergy release ratees_ES
dc.subjectpolymer matrix compositeses_ES
dc.titleNumerical assessment of an experimental procedure applied to DCB testses_ES
dc.typeinfo:eu-repo/semantics/articlees_ES
dc.rights.holder© 2019 Elsevier Ltd. under CC BY-NC-ND licence (https://creativecommons.org/licenses/by-nc-nd/4.0/)es_ES
dc.relation.publisherversionhttps://www.sciencedirect.com/science/article/pii/S0142941819316307es_ES
dc.identifier.doi10.1016/j.polymertesting.2019.106288
dc.departamentoesIngeniería mecánicaes_ES
dc.departamentoeuIngeniaritza mekanikoaes_ES
dc.identifier.eissn1873-2348


Files in this item

Thumbnail
Name:
Accepted_POTE_2020_N.Insausti_ ...
Size:
320.5Kb
Format:
PDF
Description:
Postprint
View/Open

This item appears in the following Collection(s)

Show simple item record

© 2019 Elsevier Ltd. under CC BY-NC-ND licence (https://creativecommons.org/licenses/by-nc-nd/4.0/)
Except where otherwise noted, this item's license is described as © 2019 Elsevier Ltd. under CC BY-NC-ND licence (https://creativecommons.org/licenses/by-nc-nd/4.0/)