Stiffening near-net-shape functional parts of Inconel 718 LPBF considering material anisotropy and subsequent machining issues
View/ Open
Date
2021-12-24Author
Pérez Ruiz, José David
Marin, Felipe
Martínez Rodríguez, Silvia
Lamikiz Mentxaka, Aitzol
Urbicain Pelayo, Gorka
López de Lacalle Marcaide, Luis Norberto
Metadata
Show full item record
Mechanical Systems and Signal Processing 168: (2022) // Article ID108675
Abstract
[EN] Additive manufacturing of metallic parts has witnessed significant development. The laser powder bed fusion (LPBF) process has emerged as a key process for manufacturing thin-walled components. However, despite the significant advances, post-machining operations are required for the improvement of dimensional and surface quality, specifically in low stiffness components. This study proposed an iterative design methodology for improving the stiffness of such LPBF components. In the first stage, an initial assessment of the machining conditions was performed to obtain a first approach to the relationship between tooth passing, natural, and chatter frequencies. Thereafter, a method to improve Young's modulus was proposed by evaluating the elastic anisotropy of different manufacturing configurations. Furthermore, LPBF lateral stiffeners were included in the workpiece design, thereby converting the final workpiece into a temporary assembly. The proposed methodology was applied in a case study for finishing thin-walled bent ducts and a comparison for surface quality between stiffened and non-stiffened ducts using the proposed methodology was conducted. A significant roughness and cutting force reduction (≈50%) were obtained for the stiffened duct.