Effect of CeO2 and MgO promoters on the performance of a Ni/Al2O3 catalyst in the steam reforming of biomass pyrolysis volatiles
Date
2019-10-25Author
Artetxe Uria, Maite
Amutio Izaguirre, Maider
Bilbao Elorriaga, Javier
Metadata
Show full item record
Fuel Processing Technology 198 : (2020) // art. id: 106223 // https://doi.org/10.1016/j.fuproc.2019.106223
Abstract
A Ni/Al2O3 catalyst has been modified incorporating CeO2 and MgO promoters in order to improve its performance in the steam reforming of biomass pyrolysis volatiles. Ni/Al2O3, Ni/CeO2-Al2O3 and Ni/MgO-Al2O3 catalysts have been prepared and fresh and deactivated catalysts have been characterized by N2 adsorption/ desorption, X-ray Fluorescence (XRF), Temperature Programmed Reduction (TPR), X-ray powder diffraction (XRD), Temperature Programmed Oxidation (TPO), Transmission Electron Microscopy (TEM) and a technique based on Fourier Transform Infrared Spectroscopy-Temperature Programmed Oxidation (FTIR-TPO). The results obtained revealed a similar initial activity for the three catalysts tested (conversion higher than 98%), whereas stability has been greatly improved by incorporating CeO2 as promoter, as it enhances the gasification of coke precursors. However, Ni/MgO-Al2O3 catalyst is slightly less stable than Ni/Al2O3, presumably as a result of its lower reducibility due to the formation of MgAl2O4 spinel phase. Catalysts deactivation has been associated with coke deposition, although sintering phenomenon became also evident when the Ni/CeO2-Al2O3 catalyst was tested. The coke deposited on the catalysts does not present any specific morphology, which is evidence of its amorphous structure in the three catalysts studied.