Show simple item record

dc.contributor.authorArmentia Sánchez, Mikel
dc.contributor.authorAbasolo Bilbao, Mikel
dc.contributor.authorCoria Martínez, Ibai
dc.contributor.authorBouzid, Abdel-Hakim
dc.date.accessioned2020-10-15T11:15:50Z
dc.date.available2020-10-15T11:15:50Z
dc.date.issued2020-09-26
dc.identifier.citationApplied Sciences 10(19) : (2020) // Article ID 6748es_ES
dc.identifier.issn2076-3417
dc.identifier.urihttp://hdl.handle.net/10810/46912
dc.description.abstractSelf-loosening of the prosthetic screws is a major mechanical problem affecting roughly 10% of dental implants, according to the literature. This phenomenon may lead to micro-movements that produce crestal bone loss, peri-implantitis, or structural failure of the implant assembly. In this paper, a simple and effective tool to predict self-loosening under masticatory loads is presented. The loads acting on the screw are obtained from a simple finite element (FE) model, and introduced in a mathematical formula that calculates the torque needed to loosen the screw; self-loosening will occur when this torque becomes zero. In this sense, all the parameters involved in self-loosening phenomenon can be easily identified, and their effect quantified. For validating purposes, 90 experimental tests were performed in a direct stress test bench. As a result, a powerful tool with a maximum experimental error of 7.6% is presented, allowing dental implant manufacturers to predict eventual occurrence of self-loosening in their developed dental implant products and take corrective actions at preliminary design stage. Furthermore, the following clinical implications can be directly derived from the methodology: a higher screw preload, that is a higher tightening torque, improves self-loosening response of the dental implant and, similarly, for a given preload force, higher friction coefficient and screw metric, as well as lower pitch and thread angle values, are also found to be beneficial.es_ES
dc.description.sponsorshipThis work has received financial support of the Basque Government [grant number IT947-16].es_ES
dc.language.isoenges_ES
dc.publisherMDPIes_ES
dc.rightsinfo:eu-repo/semantics/openAccesses_ES
dc.rights.urihttp://creativecommons.org/licenses/by/3.0/es/
dc.subjectdental implantes_ES
dc.subjectself-looseninges_ES
dc.subjectanalytical tooles_ES
dc.subjectdesign methodologyes_ES
dc.subjectmechanical approaches_ES
dc.titleOn the Use of a Simplified Slip Limit Equation to Predict Screw Self-Loosening of Dental Implants Subjected to External Cycling Loadinges_ES
dc.typeinfo:eu-repo/semantics/articlees_ES
dc.date.updated2020-10-13T13:24:06Z
dc.rights.holder2020 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).es_ES
dc.relation.publisherversionhttps://www.mdpi.com/2076-3417/10/19/6748es_ES
dc.identifier.doi10.3390/app10196748
dc.departamentoesIngeniería mecánica
dc.departamentoeuIngeniaritza mekanikoa


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

2020 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).
Except where otherwise noted, this item's license is described as 2020 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).